Description:

For helicopter and F3C swash
Metal 1-3 stage gears
High-strength metal end-stage gears
Upper/middle/bottom aluminum case
S.BUS system

Speed: 0.07sec/60°(7.4V) / 0.075sec/60°(6.6V)
Torque: 30.0kgf-cm(7.4V) / 26.2kgf-cm(6.6V)
Dimensions/Weight: 40.5×21.0×26.2mm / 54g

Dry Batteries cannot be used.

Operation is possible as long as the BEC is always 7A or higher.

This servo has a default setting of 760µs and should be used for the swash of a 3-axis gyro that can be set to 760us.
(It is also possible to change the setting to 1520µS.)