Description:

All the available quantity has been sold out. 
Unfortunately, there is no prospect for the next production, so we cannot guarantee that this item will be produced again, so the lead time is uncertain.  We sincerely apologize for the disappointment.

Basic Contents

System/2.4GHz computer system FH5U/FH5 Number of CH/4ch /T

ransmitter/EXZES ZIII

Transmitter battery/LP1-2500(Type-C)

TFT color LCD (480 x 320) with excellent visibility
Touchpad for intuitive operation
Equipped with a charging port on the transmitter body, and a built-in Li-Po battery (LP1-2500) with charging circuit LED
　The charging circuit LED on the built-in Li-Po battery (LP1-2500) allows the status of the battery to be checked during charging.
　Charging cable is not included. Please prepare commercially available micro USB cable (Type-C) separately.
　LP1-2500 does not support USB PD (USB POWER DELIVERY).
　　Therefore, it cannot be charged by USB PD devices.
Micro SDHC card support enables management of firmware updates, model data, and telemetry log data.
　management of firmware updates, model data, and telemetry log data.
Please use a genuine Sanwa micro SD card or a micro SD card with an applicable format (FAT32).
　Please use a genuine Sanwa micro SD card or a micro SD card with an applicable format (FAT32).
　We recommend a genuine Sanwa micro SDHC card 8GB.
Multi-setting gear function enables PGS servo setting by connecting a servo to EXZES ZⅢ.
Compatible with SSL CODE10, enabling real-time changes to PGS servo and SUPER VORTEX Gen2 PRO settings from the transmitter.
　PGS servo and SUPER VORTEX Gen2 PRO settings can be changed in real time from the transmitter.
Quick Setup Wizard makes it easy to set up model data and various settings.

[Other special features]
Full-dot color LCD (480 x 320)

Touch pad

Built-in antenna

FeelingST and TH tension adjustment

Safety Link

Racing mode

Setup wizard
Dual rate

Endpoint adjustment

Anti-lock brake

Servo speed 

OffsetTrim/sub trim

Servo reverse

Curve

Fail safe

Timer Lap

CODE AUX
Model memory

Model name

Model (select/copy/clear/sort)

Direct model select
RF MODE setting (FH5U,FH5)

Response mode setting (SXR/SUR/SSR/SHR/NOR)

BindLog (REC/RPM/VOLT/TLM1/TLM2/ST point/TH point/RX mode/readout function)
Servo monitor

Key assignment

Vibrator

AUX type

Trim type

Throttle type
Calibration

Custom menu

Mechanical rudder angle adjustment

Indicator

Motion steering
Motion steering, etc.
Compatible receivers: RX-493i, RX-492i, RX-49T, RX-493, RX-492, RX-491