Description:

Pre-machined main wing trailing edge material and a fuselage tailored to the latest mechanicals reduce aerodynamic drag as much as possible, enabling flight as desired even with an airframe weighing less than 100 grams.

Although this is an ultra-compact laser-cut balsa kit, craftsmanship is required for the ribbed main wings with a wing thickness of 7%.

Please enjoy light and nimble flight with good manners, such as ridge soaring using the bank wind.

Linkage parts are not included in the kit.

This aircraft is a balsa assembly kit.
*The aircraft in the photo is an example of a kit assembled and finished with film applied.
*There are many parts that require skill and experience for production.

Main Separate Preparations

-Aircraft radio transmitter/receiver
-Two Tahmazo TS-D1102 (48905) servos for the rudder and elevator

  We recommend the Tahmazo TS-D1102 digital sub-micro servo, which can be driven by a 1-cell LiPo.

-Battery: 1-cell LiPo battery Tahmazo LP-1S1P250RE is recommended.

-Film for covering (E-light 345 recommended)
-PILOT VIP Iron Type-R (47058) Type-F (47826)
-HD heat gun for film application (47404)
-Instant adhesive OK Bond BW(43009)
-Epoxy adhesive (30-minute curing type)
-PILOT Balsa Canner (47875)
-PILOT Sanding block (25042)
-Sandpaper
-Other general tools (cutter knife, screwdriver, etc.)

Features

Overall Length  625mm
Wing Span       850mm
Wing Area        9.3dm2
Weight            95-99g
RC Mechanical Radio EV, RD
Difficulty level  For intermediate to advanced fliers
Balsa assembly kit