Features

• Can be installed anywhere for its compact size
• Chargable from two ports at 50W simultaneously (maximum 100W output in total)
• Adopting XT60 type in main output unit to improve the power supply efficiency
• Can operate independent ports by switching 4+1 buttons
• 2x16 LCD adopted on the front side to improve its visibility
• The best charger for stepping up from single charger

Specifications

• Battery: Li-Po / Li-Fe / Li-Ion / Li-HV / Ni-MH / Ni-Cd / PB
• Cell: Li-Po / Li-Fe / Li-Ion / Li-HV : 2-4cell    NiMH / Ni-Cd : 6-8cell   PB : 6-12V
• AC Input: 100-240 volts
• Charge Current :0.1-5.0A (Each Port Maximum 50W*2)
• Balance Port Current : Maximum 300mA / Cell
• Tricle charge current : 50-300mA / Off
• Memory : Maximum 10 memories
• Display type : 2 x 16 LCD
• Color of back light of display : Blue
• Security Timer : 1-720 minutes off
• Dimensions: 100 x 90 x 127 mm
• Weight: 500g
• Funcitons: Charging (Balance, Balance-less)  Storage (Charging for storing)[Li] Charging/Repeak[Ni]  Charging(Normal, AGA, Cold)[Pb]  Battery Memory, TVC, Battery meter, Battery internal resistance meter, Various safety functions

   *1 Li-HV battery has higher voltage than Li-Po battery and it is a battery with a rated voltage of 3.8V and a charge completion voltage of 4.35V.

   *2 Be careful not to charge Li-Po battery in Li-HV mode. 

Included

• X2 Vertical Compact x 1
• XT60 cable 2 pin T type x 1
• XT60 cable Tamiya type x 1
• Balance converting cable (For Tamiya Li-Fe) x 1
• Balance cable for X1 Pocket x 2
• Balance converting board (JST-XH Type) x 2
• AC Input cable x 1
• Manual x 1