Description:
This is OS-15CVX from OS Engine.
Features:
l 12
size mounting dimensions, fits easily into many 1/10 scale cars
l 10E
carb has adjustable idle and low-end, and an angled adjustable high speed
needle
l Short
heatsink head for better clearance under a variety of bodies
l Front
and rear crankshaft bearings
l Two
year limited warranty through Hobby Services beginning at date of purchase
Specification:
l Displacement:
.152cu in (2.49cc)
l Bore:
0.598" (15.2mm)
l Stroke:
0.539" (13.7mm)
l Practical
RPM: 3,000 - 30,000
l Power
Output: 0.68ps (0.69hp/29,000)
l Weight:
9.32oz (266g)
l Crankshaft
Size: M5x08
l Distance/Mounting
Hole Centers Same Side: 0.37" (9.5mm)
l Distance/Mounting
Hole Centers Opposite Side: 1.2" (31.4mm)
l Distance
Muffler Mounting Hole Centers: 1.08" (27.5mm)
l Width
at Starter: 1.6" (40mm)
l Height
from Mounting Tab bottom/to top of Crankcase: 2.8" (70.7mm)
l Height
Starter Bottom to top of Crankcase: 3.5" (90.2mm)
l Height/bottom
of Mounting Tab to Muffler Hole Center: 0.98" (25mm)
l Cylinder
Head Width: 1.5" (38mm)
l Length
from Starter to end of Crankshaft: 4.9" (124.1mm)
l Length
from Center of Engine to Drive Hub: 1.6" (40.6mm)
l Length/end
of Crankshaft to Center of Engine: 3.5" (90.6mm)
l Length
from Drive Hub to front Mounting Holes: 1.4" (35.5mm)
Requires:
l Fuel:
10-30% nitro content, 20% recommended for break-in
l Exhaust
System: Depending on vehicle
l Glow
starter, fuel tubing and track equipment
X (Twitter)
Facebook
