This product is an optional part for equipping SYE12 with DFC head.
With DFC, it is easy to sense the incoming of the rudder.
The head is 7mm lower than normal position which makes it closer to the center of gravity. Thus, improving the direct feeling of the control and reduces the pendulum phenomenon.
Features:
l SYE12 will lower 22mm than genuine FBL head.
l Both ends of the bearing are linkage part of DFC, compared with normal 1 -point support, it enjoys excellent durability.
l The resolution of the swash plate increases.
l Center hub and the yoke are separate; it is possible to change the length easily.
Included:
l EP Yoke
l EP center hub
l EP-DFC for pitch arm (already Brg built-in )
l EP-DFC rod
l Each screw, bearings, etc.
Note:
Conditions of mounting requirement
This product has been designed based on the head of FORZA700.
①61995 using main mast F700RH or the short mast sold in our company.
(The length of the rod is fixed; please use the above main mast)
② For FORZA700, head grip , spindle , grip washer and the swash plate are necessary.
( for Damper recommend 96344 damper rubber 90 degrees)